Showing posts with label spinning. Show all posts
Showing posts with label spinning. Show all posts

Wednesday, March 07, 2012

Drop Spindle

Sometimes the stress of life gets to me and I just can't create. This week has been like that. I have lots of ideas but not enough drive to follow through. I went for a long walk today to clear my head.

Tonight I did a little spinning. It wasn't going so well and I ended up with a headache so I set it aside and ate dinner. Here are some photos of me spinning on Sunday. I made the spindle from polymer clay.



Monday, March 05, 2012

Junk Journal and Fairy Gourds

Today I worked on my junk journal adding all those paper bits of art that get knocked off by cats. Little paintings, sketches, magazine tear sheets, old letters, postcards and stuff that just clutters up the place until I sit still long enough and get it into the journal.

Yesterday at the archery range I started 2 gourd fairy houses. I glued gourd seeds around the windows and doors.  But by the time I got it home in a plastic bag, some of the seeds had been knocked off. So I glued them back down, and then used a toothpick to drizzle Modpodge between each seed. Now I feel like they'll be much more secure.  Tomorrow if the weather stays nice I'll take the wood burner out to the garage and burn designs on the gourds. It was a bit much doing it indoors. Even with good ventilation the smoke lingered for hours.  So from now on I'll do it outdoors or in the garage unless the weather is bad and I have deadlines to finish the work.

Also, at the archery range, I worked with my drop spindle. I think I spun for 20 minutes and only had the thread break once, so I must be getting better. I just needed consistent practice.

Tomorrow we have to take the cat to the vet for his yearly check-up. I'm sure we'll end up running errands too.  I just hope I get home long before dark so I can work on craft inventory.

Monday, February 27, 2012

SCA Robin Hood Tourney

Yesterday I was at an SCA event focusing on spinning on a drop spindle. I also got some crochet in when my arm got too tired from winding the yarn around the spindle. I think I need a fatter spindle that doesn't tire out my hands so much. I didn't quite finish my jester hat but I'm getting close. In fact I wanted to wear it yesterday. But Sat. was a busy busy day and I didn't get to finish it.

Today I worked on some wood burning on a disk. It's raining today so I guess I'll wait until tomorrow to take photos. I forgot to take a photo of myself yesterday but here's a photo of my boyfriend winning an SCA award. He worked very hard yesterday and answered dozens of archery questions.

Saturday, February 25, 2012

I Made a Drop Spindle

I wanted to use my drop spindle tomorrow at an SCA event and I couldn't find it. So I made one out of white Sculpey. Unfortunately my oven is possessed. I was supposed to bake it at 275 degrees for 15 minutes. So I set it modestly at 225. When I took the piece out 15 minutes later, it was very scorched. The oven thermometer read 350 degrees. I could have just lived with it like that. But I decided to glue decorative paper to the front and back with ModPodge. I made the shaft out of a poplar dowel. The hole in the disk shrank a bit as I expected so I enlarged it with a round file so the dowel would fit again. I dyed the dowel red and coated it with ModPodge as well. I needed a piece of wire to make the hook. I grabbed a large safety pin and cut the wire from that, using the super sharp end to push it into the dowel. Once it's all dry and put together I'll share a photo. I don't think it will be that durable since the Sculpey was old and a bit crumbly so I couldn't smooth it as well as I would have liked. But it will do for tomorrow and the project has potential. I'll just have to be careful not to drop it on anything hard. I am taking a straw mat with me tomorrow and I'll work over that in case the yarn breaks and the spindle goes flying like a top. So once again necessity is the mother of invention.

Tuesday, April 05, 2011

Night Spinners

Last night I went to a spinners group called the Night Spinners. I worked on my knitting, and about half the ladies worked on their spinning wheels.  Calvin worked on plying some yarns on a drop spindle. The hostess shared chocolate covered strawberries and hummus and chips and chocolate chip cookies.  They were all so generous. I came home with some cotton fiber, some cotton seeds for growing my own, some canning jars, some knitting magazines, a pair of foldable scissors and lots of useful information. Best 3 hours I've spent in a long time.

Monday, March 14, 2011

New Plans

I ran into a weaver I met years ago yesterday. Then today I ran into him again and this time he was with his wife.  She offered to teach me to spin. How can I resist? Their guild meets once a month to spin, weave, knit and so forth.
By the time I got home I was in a knitting mood, so I started a new cable knit scarf in a neutral tone. I don't normally work with neutrals so I hope I don't get bored.
I'm also thinking of volunteering at the Irish fair in Irvine in June.  By then maybe I'll be good enough at spinning to do a spinning demo. I know how to use a drop spindle but not a spinning wheel.

Tuesday, January 19, 2010

Paleoplanet

At our paleoplanet gathering last Sunday, we knew rain was on the way, but we went anyway and had half a day to work on archery projects. I took my spinning and my beadwork. After about 2 it started to drizzle so most of us headed home.

I'm glad I got to enjoy the outdoors on Sunday because is poured all day Monday. We spent the day slogging around in the rain. We had to go to JoAnn's to get more serger thread for the bow socks. When you are serging all the raw edges of about 40 canvas bow socks, you go through a lot of thread. Then they have to be dyed, sewn together and so forth. We need to have them ready for a craft thing in Feb.


Wool on a drop spindle



A bolo made of cordage and metal nuts.



Learning to shoot a bow



Freeform necklace



Tom doing knapping



Alex making a bow

Friday, January 15, 2010

Working on My Gourd Drum

This is my 700th post to this blog. Amazing. I guess I have more persistance than I thought.
Today I worked on my gourd drum. I had to level the top and the bottom and clean more gunk out of the insides. I still have a ways to go but my hands wore out before my work was finished. Tomorrow is another day. We're expecting a rainstorm, so I wanted to get as much outdoor work done as possible.

I also worked on more spinning with the drop spindle. I need to figure out what to use for bobbins so I can ply 2 strands together.

One of the sellers I know from the Etsy chatroom is 2 sales away from 5,000. Amazing. She sells hand painted yarns and stitch markers.

She said it gets easier after the first 100 sales. I'd sure like to find out if that's true. Ah well, it's almost midnight so I'm off to make my bed, if I can get Rocky the cat to find a new sleeping spot.


Tuesday, January 12, 2010

The Gourd Doll




I glued the wool hair on my gourd doll today. I barely made enough hair! I'd forgotten how much it takes. I dyed it blond with some lemon tea and onion skins in boiling water with some salt. I was hoping to spin some of the yarn too but only had enough for the hair. I had forgotten I should have finished the doll body, sprayed it with finish and then added the hair. It will be harder this way. But oh well.

Speaking of spinning, I made 2 drop spindles. I haven't given them a test drive yet. I may have to drill a hole for the wire hook at the top. I made a small hole with a bead reamer and glued the wire w/ super glue but I'm not sure it will hold. But nothing ventured, nothing gained.

Wednesday, June 18, 2008

Knitters and Spinners




On Sat. I met some knitters and spinners at a juggling festival.