Showing posts with label wax. Show all posts
Showing posts with label wax. Show all posts

Saturday, February 22, 2014

Sand Candle From Repurposed Wax Part Two

I was so excited to dig up the candle this morning.


  1. Untie the wick from the stick. Use the stick to loosen the wet sand from around the candle. It's like digging up treasure.
  2. Brush excess sand off of candle.
  3. Now I could have either let it dry and then brushed more sand off, or rinsed it off with a hose. I used the hose and it only took a few minutes.
    I can't wait to see what it looks like!


    Loosen the sand around the candle.

    Brush off the excess sand.
    4. Trim the wick
    After rinsing with a hose.
  4.  

    5. Eventually I'll make the candle level by sitting the candle in a old warm skillet and carefully adjusting the legs.
    6. If you want to remove more of the sand, you can dip the candle in a pot of simmering water. But I like my sand candles sandy. It reminds me of the beach.

Shell detail. See the layers of pink and brown?
This is a demo photo for the blog. I'd never burn a candle this close to books.
     
Finished Sand Candle
When I level it, it will look like this.
    If you make one I'd love to see it. Put a link in the comments.  
    TIP: I collect old pots and pans for candle making and keep them in a box for that purpose. Probably best not to use your candle making pots and  pans for making food. Thrift stores and yard sales are a great place to look for old pots and pans. 

Friday, February 21, 2014

Making a Sand Candle Out of Recycled Wax Part 1



I got tired of talking about making candles and decided to just do it. I learned how to make sand candles in the 70's, and I made them again once in the 80's. So here I am again. When life gives you sand, make sand candles.

Getting the Mold Ready
Fill bucket with sifted sand.
Close up of wick placement and holes in sand made with my fingers.
  1. I filled a bucket with sifted sand. Sift it through whatever screen you have on hand. I used a bicycle basket with fine holes. 
  2. Get the sand damp. We're talking 'sandcastle' and not 'mud pie'
  3. Dig out a scoop with your hand to put the wax in. Then I poked my fingers in to give my candle 'legs'. 
  4. I took a seashell and pressed it into the side, with the part I want to show facing into the sand.
  5. Place a wick. I used a stick to loop it over so it will stay where I want it.
Wick placement.
Melting the Wax
  1. I melted my wax in a 'double boiler' set up using an old thrifted tea pot and a metal can. I should have bent the can to make a pour spout but oh well.
    Melting wax for a sand candle.
    Almost melted. Use an old fork to remove debris like old wicks or paper bits.
  2. Heat the water in the teapot over medium with the can of wax sitting in it. The tea kettle is about 1/3 full of water. Never leave wax unattended. It is flammable. So keep the heat down and keep an eye on it.
  3. I used old candle wax, two warped tapers, a few crayons, and a chunk of beeswax so the can would be almost full. As the wax melted I stirred it with an old fork. Then I fished out the old wicks and debris with the fork.
  4. I turned off the heat and let the steam settle down. Then I put a lid over it and carried it outside with a potholder.
    Carefully carrying hot wax outside.
  5. I very carefully picked up the can with tongs and poured it into the mold. Wax shrinks in the center when it cools so I knew I'd have to pour a 2nd layer.
    So far so good. You can see the seashell poking up a bit. The second pour will cover it.

    The hardest thing about making candles is having to wait to see the end result.
  6. I melted another 1/2 can of wax. Most of it was beeswax and a few crayon pieces. 
  7. I probably should have waited about 2 hours before the 2nd  pour, but I just wanted to get on with it.
    After the 2nd pour. Just the right level of wax.
Stay tuned for part 2 tomorrow to see how it turns out!

Thursday, April 22, 2010

Earth Day Peace T-shirt Batik Project

I'm starting a new t-shirt project after being inspired by a t-shirt designer on Etsy whose shop is called OddManOut Press and by another t-shirt artist named Dylon White, who is more well known for his chainmaile books.

Since I'm doing a peace project and today is Earth Day my first shirt is going to be a batik and tie dye combo with a peace sign on it. I already applied the wax and dropped it into the procyon dye bath. I can see that the shirt is now Lapiz blue but I can also see the waxed part is still hot pink. Last time I tried something with wax I forgot the dye bath had to be tepid not boiling and all the wax melted off. So I have confidence that the wax didn't melt this time.

Putting wax on fabric can be tricky. I found a heat gun very useful in melting any wax that hardened too fast. I don't have any fancy batik tools so I'm just doing the best I can with what I have.

In 20 minutes I will add soda ash to the dye bath. Updates to follow.

Update: I took an educated guess that if I used the blue dye over the hot pink shirt, I'd get a lovely purple, and after everything was rinsed out that indeed was what I had. I've very pleased with it, but have opted to give it one last good rinse, and then wait until tomorrow to iron the wax out. I can't wait to see what the end results will be.

The t-shirt with the wax on it before dyeing.


The lapiz dye premixed in a glass jar.


They dye bucket is yellow so it's hard to tell the dye is blue.
The bright spots are the pink areas still covered with wax.


Taking the rubber bands off the tie dyed portions.


Back view.


I haven't ironed the wax off yet, but here you can see
basically what it will look like.

Update 2:
I spent about 30 minutes this morning ironing the wax out of my t-shirt onto some brown paper. Then I gave it a run through the washing machine. Right now it's in the dryer. Looks great!

Wednesday, June 24, 2009

Gourd Drum cont.




I decided to do a wax resist on the gourd. So I drew a sea turtle freehand, filled in between the lines with white crayon, and burned in all the lines with a wood burning tool. Then I applied yellow dye and then blue dye. Then I flicked alcohol on it so it would drip and make interesting spots and runs. Now I will let it dry until tomorrow and then remove the wax by heating it up with a hair dryer and wiping the wax off with a clean rag. Hope it works, but even if it doesn't it looks pretty amazing the way it is right now. I don't think the alcohol disturbed the wax any. I may regret not doing it with melted wax and a brush, but that's a hassle and the crayon was much easier. Plus crayon doesn't run.

Wednesday, October 29, 2008

Art Supply Warehouse

I just got home from Art Supply Warehouse. ASW has a new line of wonderful beads to drool over and I couldn't resist getting some. The store is in Westminster CA. They've got a fun new billboard up and they've rearranged their store layout. My daughter and I ooohed and ahhhed around every bend.

Always on top of the trends, ASW has the latest tools for encaustic (wax) art, and a Strathmore sponsored Artist Trading Card (ATC)promotion going on. Their bookbinding section is well stocked. And they carry silkscreening and eraser stamp/linoleum block printing supplies. They also have a lot of DIY stuff.

So now my mind if full of even more creative ideas. Sometimes I feel like my head is going to explode.

Tuesday, September 02, 2008

Shopping for supplies at Joanne's




After swearing I wouldn't get too carried away at Joanne's today now that I had my Google Adsense check in hand, I did get a bit carried away.My main goal was to get a mini quilting iron for scrapbooking. To my shock they were $30 and up, so even with the 40% off coupon that was more than I wanted to pay. But I decided to check the notions dept. too and found the coolest little traveling iron in designer colors for only $9.99. They had color choices of pink/white, translucent red, translucent blue, and black. So I got the red one. It says on the label you can use it for collage work so I think I'm good to go with the beeswax collaging projects. Can't wait to try it.


I don't know about you, but every time I sew my cat walks all over me, the machine, the sewing desk, and the surrounding boxes. He knocks off the scissors, pins, scraps, you name it. So the other thing I've been looking for is a cork board or something to hang behind the sewing machine. I didn't even know Joanne's carried such a thing but saw in their ad a cork and dry erase board with magnets. It was on sale too so I got 2 of them. I can use push pins to hang up pattern bits, and get magnetic hooks to hang up my scissors, seam ripper and so on. That should make sewing a lot less aggravating and frustrating.


Then just for fun I got the Blue Moon combo pack of beads and faux pearls called Frosting to make myself some Steampunk inspired cluster earrings. I loved all their color combos and was torn between the red, blue, purple or the one I got. Hopefully I'll get to make those today though I'm pretty tired because I stayed up until 3 AM last night. Why oh why do I do that?


The Knifty Knitter products were also on sale so I picked up the flower loom I've wanted for a few years now.

I hope the rest of you in the USA had a good 3 day weekend.